CHAPTER
7-1
Cisco ASA 5500 Series Configuration Guide using ASDM
OL-20339-01
7
Using the Startup Wizard
The ASDM Startup Wizard guides you through the initial configuration of the adaptive security
appliance, and helps you define its settings.
This chapter includes the following sections:
• Information About the Startup Wizard, page 7-1
• Licensing Requirements for the Startup Wizard, page 7-1
• Prerequisites for the Startup Wizard, page 7-2
• Guidelines and Limitations, page 7-2
• Startup Wizard Screens for ASA 5500 Series Adaptive Security Appliances, page 7-3
• Startup Wizard Screens for the ASA 5505 Adaptive Security Appliance, page 7-3
• Configuring IPv6 Neighbor Discovery, page 7-18
• Configuring IPv6 Static Neighbors, page 7-25
• Feature History for the Startup Wizard, page 7-29
Information About the Startup Wizard
To access this feature in the main ASDM application window, choose one of the following:
• Wizards > Startup Wizard.
• Configuration > Device Setup > Startup Wizard, and then click Launch Startup Wizard.
Licensing Requirements for the Startup Wizard
The following table shows the licensing requirements for this feature:
Model License Requirement
All models Base License