EasyManuals Logo

Cisco 5510 - ASA SSL / IPsec VPN Edition Configuration Guide

Cisco 5510 - ASA SSL / IPsec VPN Edition
1822 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #197 background imageLoading...
Page #197 background image
6-23
Cisco ASA 5500 Series Configuration Guide using ASDM
OL-20339-01
Chapter 6 Configuring Multiple Context Mode
Feature History for Multiple Context Mode
Feature History for Multiple Context Mode
Table 6-2 lists each feature change and the platform release in which it was implemented. ASDM is
backwards-compatible with multiple platform releases, so the specific ASDM release in which support
was added is not listed.
Table 6-2 Feature History for Multiple Context Mode
Feature Name
Platform
Releases Feature Information
Multiple security conexts 7.0(1) Multiple context mode was introduced.
The following screens were introduced: Configuration >
Context Management.
Automatic MAC address assignment 7.2(1) Automatic assignment of MAC address to context interfaces
was introduced.
The following screen was modified: Configuration >
Context Management > Security Contexts.
Resource management 7.2(1) Resource management was introduced.
The following screen was introduced: Configuration >
Context Management > Resource Management.
Virtual sensors for IPS 8.0(2) The AIP SSM running IPS software Version 6.0 and above
can run multiple virtual sensors, which means you can
configure multiple security policies on the AIP SSM. You
can assign each context or single mode adaptive security
appliance to one or more virtual sensors, or you can assign
multiple security contexts to the same virtual sensor.
The following screen was modified: Configuration >
Context Management > Security Contexts.
Automatic MAC address assignement
enhancements
8.0(5)/8.2(2) The MAC address format was changed to use a prefix, to use
a fixed starting value (A2), and to use a different scheme for
the primary and secondary unit MAC addresses in a failover
pair. The MAC addresess are also now persistent accross
reloads. The command parser now checks if auto-generation
is enabled; if you want to also manually assign a MAC
address, you cannot start the manual MAC address with A2.
The following screen was modified: Configuration >
Context Management > Security Contexts.

Table of Contents

Other manuals for Cisco 5510 - ASA SSL / IPsec VPN Edition

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco 5510 - ASA SSL / IPsec VPN Edition and is the answer not in the manual?

Cisco 5510 - ASA SSL / IPsec VPN Edition Specifications

General IconGeneral
BrandCisco
Model5510 - ASA SSL / IPsec VPN Edition
CategoryFirewall
LanguageEnglish

Related product manuals