56-2
Cisco ASA 5500 Series Configuration Guide using ASDM
OL-20339-01
Chapter 56 Configuring Trend Micro Content Security
Information About the CSC SSM
Information About the CSC SSM
The ASA 5500 series adaptive security appliance supports the CSC SSM, which runs Content Security
and Control software. The CSC SSM provides protection against viruses, spyware, spam, and other
unwanted traffic by scanning the FTP, HTTP, POP3, and SMTP packets that you configure the adaptive
security appliance to send to it.
Licensing Requirements for the CSC SSM
The following table shows the licensing requirements for this feature:
Prerequisites for the CSC SSM
The CSC SSM has the following prerequisites:
• A CSC SSM card must be installed in the adaptive security appliance.
• A Product Authorization Key (PAK) for use in registering the CSC SSM.
• Activation keys that you receive by e-mail after you register the CSC SSM.
• The management port of the CSC SSM must be connected to your network to allow management
and automatic updates of the CSC SSM software.
• The CSC SSM management port IP address must be accessible by the hosts used to run ASDM.
• You must obtain the following information to use in configuring the CSC SSM:
–
The CSC SSM management port IP address, netmask, and gateway IP address.
–
DNS server IP address.
–
HTTP proxy server IP address (needed only if your security policies require the use of a proxy
server for HTTP access to the Internet).
–
Domain name and hostname for the CSC SSM.
Model License Requirement
ASA 5505 No support.
ASA 5510 Security Plus License: 2 contexts.
Optional license: 5 contexts.
ASA 5520 Base License: 2 contexts.
Optional licenses: 5, 10, or 20 contexts.
ASA 5540 Base License: 2 contexts.
Optional licenses: 5, 10, 20, or 50 contexts.
For the ASA 5510, 5520, and 5540:
• With a Base License, the features enabled by default are SMTP virus scanning, POP3 virus scanning and content filtering,
webmail virus scanning, HTTP file blocking, FTP virus scanning and file blocking, logging, and automatic updates.
• With a Security Plus License, the additional features enabled by default are SMTP anti-spam, SMTP content filtering,
POP3 anti-spam, URL blocking, and URL filtering.
To Next Page
Loading...
Need help?
General
