75-15
Cisco ASA 5500 Series Configuration Guide using ASDM
OL-20339-01
Chapter 75 Managing Software and Configurations
Backing Up and Restoring Configurations, Images, and Profiles
Step 11 If you are backing up an identity certificate, you receive a dialog asking you to enter a separate
passphrase to be used for encoding the certificates in PKCS12 format. You can enter a passphrase or skip
this step.
Note Identify certificates are backed up by this process, certificate authority certificates are not
backed up.
• To encrypt certificates, enter and confirm your certificate passphrase in the Certificate Passphrase
dialog box and click OK. You will need to remember the password you enter in this dialog box when
restoring the certificates.
• Clicking Cancel skips the step and does not backup certificates.
After clicking OK or cancel, the backup begins immediately.
Step 12 After the backup is complete, the status window closes and the Backup Statistics dialog box opens and
provides success and failure messages.
To Next Page
Loading...
Need help?
General
