Cisco 5510 - ASA SSL / IPsec VPN Edition Configuration Guide

B-21
Cisco ASA 5500 Series Configuration Guide using ASDM
OL-20339-01
Appendix B Configuring an External Server for Authorization and Authentication
Configuring an External LDAP Server
Step 4 Add the new group-policy on the adaptive security appliance and configure the required policy attributes
that will be assigned to the user. For this case, we created the Group-policy-1, the name entered in the
Department field on the server:
hostname(config)# group-policy Group-policy-1 external server-group LDAP_demo
hostname(config-aaa-server-group)#
Step 5 Establish the VPN connection as the user would, and verify that the session inherits the attributes from
Group-Policy1 (and any other applicable attributes from the default group-policy)
You can monitor the communication between the adaptive security appliance and the server by enabling
the debug ldap 255 command from privileged EXEC mode. Below is sample output of this command.
The output has been edited to provide the key messages:
[29] Authentication successful for user1 to 3.3.3.4
[29] Retrieving user attributes from server 3.3.3.4
[29] Retrieved Attributes:
[29] department: value = Group-Policy-1
[29] mapped to IETF-Radius-Class: value = Group-Policy-1

Cisco 5510 - ASA SSL / IPsec VPN Edition Specifications

General

Brand	Cisco
Model	5510 - ASA SSL / IPsec VPN Edition
Category	Firewall
Language	English