Cisco 5510 - ASA SSL / IPsec VPN Edition Configuration Guide

1-6
Cisco ASA 5500 Series Configuration Guide using ASDM
OL-20339-01
Chapter 1 Introduction to the Cisco ASA 5500 Series Adaptive Security Appliance
New Features
New Features in Version 6.3(1)/8.3(1)
General Features
No Payload Encryption
image for export
For export to some countries, payload encryption cannot be enabled on the Cisco ASA 5500
series. For version 8.3(2), you can now install a No Payload Encryption image
(asa832-npe-k8.bin) on the following models:
• ASA 5505
• ASA 5510
• ASA 5520
• ASA 5540
• ASA 5550
Features that are disabled in the No Payload Encryption image include:
• Unified Communications.
• Strong encryption for VPN (DES encryption is still available for VPN).
• VPN load balancing (note that the GUI is still present; the feature will not function,
however).
• Downloading of the dynamic database for the Botnet Traffic Filer (Static black and
whitelists are still supported. Note that the GUI is still present; the feature will not
function, however.).
• Management protocols requiring strong encryption, including SSL, SSHv2, and SNMPv3.
You can, however, use SSL or SNMPv3 using base encryption (DES). Also, SSHv1 and
SNMPv1 and v2 are still available.
If you attempt to install a Strong Encryption (3DES/AES) license, you see the following
warning:
WARNING: Strong encryption types have been disabled in this image; the
VPN-3DES-AES license option has been ignored.
Table 1-3 New Features for ASDM Version 6.3(2)/ASA Version 8.3(2) (Unless Otherwise Noted) (continued)
Feature Description

Cisco 5510 - ASA SSL / IPsec VPN Edition Specifications

General

Brand	Cisco
Model	5510 - ASA SSL / IPsec VPN Edition
Category	Firewall
Language	English