Cisco 5510 - ASA SSL / IPsec VPN Edition Configuration Guide

37-20
Cisco ASA 5500 Series Configuration Guide using ASDM
OL-20339-01
Chapter 37 Configuring Inspection of Basic Internet Protocols
FTP Inspection
Add/Edit FTP Policy Map (Security Level)
The Add/Edit FTP Policy Map dialog box is accessible as follows:
Configuration > Global Objects > Inspect Maps > FTP > FTP Inspect Map > Basic View
The Add/Edit FTP Policy Map pane lets you configure the security level and additional settings for FTP
application inspection maps.
Fields
• Name—When adding an FTP map, enter the name of the FTP map. When editing an FTP map, the
name of the previously configured FTP map is shown.
• Description—Enter the description of the FTP map, up to 200 characters in length.
• Security Level—Select the security level (medium or low).
– Low
Mask Banner Disabled
Mask Reply Disabled
– Medium—Default.
Mask Banner Enabled
Mask Reply Enabled
– File Type Filtering—Opens the Type Filtering dialog box to configure file type filters.
– Default Level—Sets the security level back to the default level of Medium.
• Details—Shows the Parameters and Inspections tabs to configure additional settings.
Modes
The following table shows the modes in which this feature is available:
Add/Edit FTP Policy Map (Details)
The Add/Edit FTP Policy Map (Details) dialog box is accessible as follows:
Configuration > Global Objects > Inspect Maps > FTP > FTP Inspect Map > Advanced View
Firewall Mode Security Context
Routed Transparent Single
Multiple
Context System
••••—
Firewall Mode Security Context
Routed Transparent Single
Multiple
Context System
••••—

Cisco 5510 - ASA SSL / IPsec VPN Edition Specifications

General

Brand	Cisco
Model	5510 - ASA SSL / IPsec VPN Edition
Category	Firewall
Language	English