Cisco 5510 - ASA SSL / IPsec VPN Edition Configuration Guide

37-47
Cisco ASA 5500 Series Configuration Guide using ASDM
OL-20339-01
Chapter 37 Configuring Inspection of Basic Internet Protocols
IPSec Pass Through Inspection
– Low—Default.
Maximum ESP flows per client: Unlimited.
ESP idle timeout: 00:10:00.
Maximum AH flows per client: Unlimited.
AH idle timeout: 00:10:00.
– High
Maximum ESP flows per client:10.
ESP idle timeout: 00:00:30.
Maximum AH flows per client: 10.
AH idle timeout: 00:00:30.
– Default Level—Sets the security level back to the default level of Low.
• Details—Shows additional parameter settings to configure.
Mode
The following table shows the modes in which this feature is available:
Add/Edit IPSec Pass Thru Policy Map (Details)
The Add/Edit IPSec Pass Thru Policy Map (Details) dialog box is accessible as follows:
Configuration > Global Objects > Inspect Maps >IPSec Pass Through >
IPSec Pass Through Inspect Map > Advanced View
The Add/Edit IPSec Pass Thru Policy Map pane lets you configure the security level and additional
settings for IPSec Pass Thru application inspection maps.
Fields
• Name—When adding an IPSec Pass Thru map, enter the name of the IPSec Pass Thru map. When
editing an IPSec Pass Thru map, the name of the previously configured IPSec Pass Thru map is
shown.
• Description—Enter the description of the IPSec Pass Through map, up to 200 characters in length.
• Security Level—Shows the security level settings to configure.
• Parameters—Configures ESP and AH parameter settings.
– Limit ESP flows per client—Limits ESP flows per client.
Maximum—Specify maximum limit.
– Apply ESP idle timeout—Applies ESP idle timeout.
Timeout—Specify timeout.
Firewall Mode Security Context
Routed Transparent Single
Multiple
Context System
••••—

Cisco 5510 - ASA SSL / IPsec VPN Edition Specifications

General

Brand	Cisco
Model	5510 - ASA SSL / IPsec VPN Edition
Category	Firewall
Language	English