Cisco 840 - Adjust the Battery Life alarm volume; Stop the Battery Life alarm

To Next Page

To Previous Page

Adjust the Battery Life alarm volume

The administrator controls the Battery Life alarm settings such as the alarm sound, tone, and vibration.

However, you can adjust the volume of the Battery Life alarm.

Procedure

Step 1 Access the Battery Life app

Step 2 Tap the Overflow menu.

Step 3 Tap Settings.

Step 4 Swipe the Alarm volume slider.

Stop the Battery Life alarm

If the administrator enables battery monitoring with an audible alarm, an alarm sounds if your battery falls

below the set low battery threshold.

When the battery alarm sounds, you can temporarily snooze the alarm. However, the alarm continues until

the battery is above the set low battery threshold.

If you’re in a call, the alarm activates in vibrate mode with a visual alert. When the call ends, if you didn’t

snooze the alarm, the audible alert begins.

Note

If you set your phone to Do Not Disturb mode and the low battery alarm triggers, it overrides Do Not Disturb

and sounds the alarm. After you snooze the alarm, the phone goes into normal mode and remains in normal

mode, in effect canceling Do Not Disturb.

Note

Procedure

Step 1 To snooze the battery alarm, swipe the alarm.

Step 2 To stop the battery alarm, either plug the phone into a charger or change the battery to one with more charge

than the low battery threshold.

Related product manuals