Cisco 840 - Turn on Bluetooth wireless technology

Turn on Bluetooth wireless technology
You can connect Bluetooth
®
headsets and Bluetooth speakers to your phone. The phone does not support
other Bluetooth devices.
Before you can use a Bluetooth device with your phone, you must turn on the Bluetooth wireless technology.
Procedure
Step 1 Access the Settings app.
Step 2 Select Connected devices > Connection Preferences > Bluetooth.
Step 3 Swipe the On slider to the right.
Pair a Bluetooth device
You can pair up to five Bluetooth
®
devices with your phone. Once the phone pairs with a device, it connects
to that device.
Before you begin
Ensure that the Bluetooth wireless technology is on.
Procedure
Step 1 Access the Settings app.
Step 2 Select Connected devices > Connection Preferences > Bluetooth.
Step 3 Tap Pair new device.
The phone searches for any Bluetooth devices in range. This scan can take a couple of minutes.
Step 4 From the list of Available devices, select the desired device and tap Pair.
Step 5 If necessary, enter the device pin code.
Connect a Bluetooth device
After you pair and connect a Bluetooth
®
device to your phone, the device automatically connects when it is
turned on and close to your phone. Only one Bluetooth device can connect to the phone at a time. So, if you
have two paired Bluetooth devices turned on, the phone uses the most recently connected device. You can
change which Bluetooth device is actively connected to your phone.
Before you begin
Ensure that the Bluetooth wireless technology is on.
Cisco Wireless Phone 840 and 860 User Guide
110
Settings
Turn on Bluetooth wireless technology