CHAPTER 9
Settings
• Access user settings for the Cisco Phone app, on page 105
• Adjust the volume during a call, on page 109
• Access the Settings app, on page 109
Access user settings for the Cisco Phone app
The User settings allow you to control certain calling features.
Procedure
Step 1 Access the Cisco Phone app.
Step 2 Choose one of the following based on your phone's software version:
• For release 1.2(0), tap the Overflow menu.
• For release 1.3(0) or later, tap the Drawer menu.
Step 3 Choose one of the following based on your phone's software version:
• For release 1.2(0), tap Settings.
• For release 1.3(0) or later, tap User settings.
Change the ringtone
If enabled by your administration, you can change the ringtone for each registration. These ringtone settings
are active only when the phone is on and unlocked. If the phone is locked, the default ringtone from the
Settings > Sound menu sounds.
The administrator can specify a ringtone in the call server. This configuration takes precedence over any
setting at the user level.
Note
Cisco Wireless Phone 840 and 860 User Guide
105
To Next Page
Loading...
