Cisco 8800 Series User Manual

Table 6: HTTP Proxy Settings
DescriptionParameter
Choose the proxy mode for the HTTP proxy setting.
Options are:
• Auto
• Manual
• Off
Default: Off
Proxy Mode
Select Yes to use the Web Proxy Auto-Discovery
(WPAD) mechanism to automatically retrieve a Proxy
Auto-Configuration (PAC) file.
If the parameter is set to No, you must configure PAC
URL.
This parameter is available when you set Proxy Mode
to Auto.
Default: Yes
Use Auto Discovery (WPAD)
URL locating the PAC file.
This parameter is available when you set Proxy Mode
to Auto and Use Auto Discovery (WPAD) to No.
PAC URL
Server address (hostname or IP address) of the proxy
server.
Do not provide the scheme (http:// or https://).
This parameter is available when you set Proxy Mode
to Manual.
Proxy Host
Port number of the proxy server.
This parameter is available when you set Proxy Mode
to Manual.
Proxy Port
If your proxy server requires authentication, select
Yes. Otherwise, select No. The parameter
configuration depends on the actual behaviour of the
proxy server.
This parameter is available when you set Proxy Mode
to Manual.
Proxy Server Requires Authentication
Enter a username of a credential user on the proxy
server.
This parameter is available when you set Proxy Mode
to Manual and Proxy Server Requires
Authentication to Yes.
Username
Cisco IP Phone 8800 Series Multiplatform Phones User Guide
124
Settings
Set Up a Proxy Server from the Phone Web Page

Cisco 8800 Series Specifications

General

Protocols	SIP, SCCP
Audio	Wideband audio
Connectivity	Gigabit Ethernet
Power	Power over Ethernet (PoE)
Bluetooth	Yes
USB	Yes
Codec Support	G.711, G.722, G.729, iLBC
Dimensions	Varies by model
Weight	Varies by model
Wi-Fi	Yes (varies by model)