Figure 5: Call Park in Call Park Extensions
In the above example, the phone is monitoring Park Location1. Your administrator has configured a call park
extension, Park Location1. If call park extensions are subscribed successfully, line keys will be assigned for
call park function and get the monitored extension status.
The following table shows the call park status and the relevant icon displayed next to the call park extension:
Table 4: Call Park Status and Icons
IconStatus
Idle
Parked
Forward Calls
You can forward calls from any line on your phone to another number. Call forward is phone-line specific.
If a call reaches you on a line where call forward is not enabled, the call rings as usual.
If a line is enabled with feature key sync and call forward on it, the call forward icon is displayed next to
the line key label.
If your administrator enables the XMPP directory or assigns a station name for the phone, the call forward
number displays beneath the XMPP user ID or the station name in the phone screen header.
There are three Call Forward services:
• Call Forward All—Forward all incoming calls to a target phone number.
• Call Forward Busy—Forward an incoming call to a target phone number when the line is busy.
• Call Forward No Answer—Forward an incoming call to a target phone number when the call isn't
answered.
You can set up the call forward service or services by a specific softkey.
Cisco IP Phone 8800 Series Multiplatform Phones User Guide
52
Calls
Forward Calls
To Next Page
Loading...
Need help?
General
