Cisco 8800 Series - Hold Calls; Put a Call on Hold; Answer a Call Left on Hold for too Long; Swap between Active and Held Calls

Procedure
Step 1 Press Mute .
Step 2 Press Mute again to turn mute off.
Hold Calls
Put a Call on Hold
You can put an active call on hold and then resume the call when you're ready. When you place a video call
on hold, video transmission is blocked until you resume the call.
Procedure
Step 1 Press Hold or Hold.
Step 2 To resume a call from hold, press Hold or Resume.
Answer a Call Left on Hold for Too Long
Your phone is configured to provide cues that let you know when you have left a call on hold for too long:
• Flashing message indicator on the handset
• Visual notification on the phone screen
• Ringing notification on the phone if a hold reminder is configured with phone web page
Procedure
Press Hold or Resume to resume the held call.
Swap Between Active and Held Calls
You can easily switch between active and held calls.
Cisco IP Phone 8800 Series Multiplatform Phones User Guide
49
Calls
Hold Calls