If you have a Cisco IP Phone 8800 Key Expansion Module connected to your phone, you can also configure
the expansion module buttons for speed dial and other phone services.
The following table describes some specific features that you configure using the phone web page.
DescriptionFeatures
You specify the number that will receive calls when call forward is enabled on the
phone. Use the phone web page to set up more complicated call forward functions, for
example, when your line is busy.
Call forward
You assign phone numbers to speed-dial numbers so that you can quickly call that
person.
Speed dial
You assign a ringtone to a specific line.Ringtone
You add a contact to your personal directory with phone web page.Personal directory
contact
You set up an HTTP proxy for the phone to connect to the internet.HTTP proxy
You set up the phone to connect to the network through a VPN sever.VPN connection
You enable the phone to filter out distracting noises from your environment during a
call or meeting.
Noise removal
Related Topics
Forward Calls with the Phone Web Page, on page 53
Speed Dial, on page 43
Assign a Ring Tone with the Phone Web Page, on page 114
Add a New Contact to Your Personal Address Book with Phone Web Page, on page 80
HTTP Proxy Settings, on page 122
Enable or Disable Noise Removal with the Phone Web Page, on page 159
Speed-Dial Numbers
When you dial a number on your phone, you enter a series of digits. When you set up a speed-dial number,
the speed-dial number must contain all the digits you need to make the call. For example, if you need to dial
9 to get an outside line, you enter the number 9 and then the number you want to dial.
You can also add other dialed digits to the number. Examples of additional digits include a meeting access
code, an extension, a voicemail password, an authorization code, and a billing code.
The dial string can contain the following characters:
• 0 to 9
• Pound (#)
• Asterisk (*)
• Comma (,)—This is the pause character, and gives a 2 second delay in the dialing. You can have several
commas in a row. For example, two commas (,,) represent a pause of 4 seconds.
Cisco IP Phone 8800 Series Multiplatform Phones User Guide
23
Your Phone
Speed-Dial Numbers
To Next Page
Loading...
Need help?
General
