When you pair a device, you can set the Bluetooth mode to Phone, Handsfree or Both. Phone allows you to
use only a Bluetooth headset. Handsfree allows you to use only your mobile phone. Both allows you to use
both a headset and a mobile phone.
When you use a Bluetooth headset and mobile devices with your phone, keep these things in mind:
• The last Bluetooth headset or mobile device connected with the phone is the default device that the phone
uses.
• You can have only one active connection at any time. For example, you can have a Bluetooth headset
or a mobile phone active.
• The phone supports one device of each type. For example, you cannot connect two Bluetooth headsets.
• You can connect one mobile device at any time. For example, if your Bluetooth headset is active, and
you connect a mobile phone, the Bluetooth headset disconnects.
• Your Bluetooth device will reconnect if you move back into range, or if it restarts.
Related Topics
Bluetooth Headsets
Pair a Mobile Device with Your Desk Phone, on page 71
The Cisco IP Phone 8800 Series, on page 1
Energy Savings
Your administrator can reduce the amount of power that the phone screen uses when you're not using your
phone. Level of energy-saving that your administrator can set up:
• Power Save—The backlight or screen turns off when the phone has been inactive for a period of time.
Turn On Your Phone
When your phone is powered off to save energy, the phone screen is blank.
Procedure
Press any key to turn on the phone.
Additional Help and Information
If you have questions about the functions available on your phone, contact your administrator.
The Cisco website (https://www.cisco.com) contains more information about the phones and call control
systems.
• For quick start guides and end-user guides in English, follow this link:
Cisco IP Phone 8800 Series Multiplatform Phones User Guide
30
Your Phone
Energy Savings