Before you begin
• Your administrator performs the necessary setup to allow you to monitor the concerned line.
• Your administrator allows configuring the BLF feature options on line keys.
Procedure
Step 1 Press and hold down the line key for two seconds.
Step 2 On the Select feature screen, select one of these options:
• If you just want to use the key to monitor a line, select BLF presence.
• If you want to use the key to monitor a line and also speed-dial the monitored line, select BLF + Speed
dial.
• If you want to use the key to monitor a line and also answer incoming calls to the monitored line, select
BLF + Call pickup.
• If you want to use the key for all the three functions, select BLF + Speed dial + Call pickup.
Step 3 Enter the user ID of the person whose line you want to monitor, in the User ID field.
You must enter the user ID. The user ID may not be the person's name or extension. Consult your
administrator if you need assistance.
Note
If your administrator has configured a BLF list for you, you can select the user whose line you want to monitor
from the list:
a) Select Search BLF list.
Users whose names appear in grey in the list are ones that your phone is already monitoring on individually
configured BLF keys.
b) Select the user whose line you want to monitor.
The user ID appears in the User ID field.
If you select a user who is already monitored on an individually configured key, the new configuration
overrides the previous configuration to monitor the user.
Step 4 Press Save.
Remove the Feature Configured on a Line Key
You can remove the feature configured on a line key.
If your phone is monitoring a Busy Lamp Field (BLF) list, removing the feature configured on a line key
makes the line key available for monitoring the BLF list. This can change the positions of BLF list keys. See
Activate or Deactivate Monitoring of the BLF List, on page 19 for details.
You cannot remove some features configured by your administrator.
Note
Cisco IP Phone 8800 Series Multiplatform Phones User Guide
21
Your Phone
Remove the Feature Configured on a Line Key
To Next Page
Loading...
Need help?
General
