Procedure
Step 1 Press Applications .
Step 2 Select Network configuration > Wi-Fi configuration > Wi-Fi .
Step 3 Press the Select button, to turn the Wi-Fi on or off. You can also press the Navigation cluster, left or right, to
turn the Wi-Fi on or off.
Step 4 Press Set to save the changes.
Connect the Phone to a Wi-Fi Manually
When you set up a Wi-Fi profile, it provides you the options to connect the phone manually to a wireless
network. You can establish the connection from the Wi-Fi profile screen or from the Setup Wi-Fi screen.
The top most Wi-Fi profile in the Wi-Fi prof ilescreen gets connected automatically when the phone provisions.
Before you begin
Turn on the Wi-Fi of your phone.
Procedure
Step 1 Press Applications .
Step 2 Select Network configuration > Wi-Fi configuration > Wi-Fi profile.
Step 3 In the Wi-Fi profile screen, do any of the actions to connect to Wi-Fi.
• Select any of the configured Wi-Fi profile and click Connect.
• Press Scan and select one wireless in the Connect to Wi-Fi screen. In the Setup Wi-Fi screen, enter
values in the fields and press Connect.
See the Profile Parameter table in the Set Up a Wi-Fi Profile from the Phone, on page 150 for the field values.
Connect to a Wi-Fi Network When Your Phone Displays a Connection Failure
Message
If your phone supports Wi-Fi, it provides status information if it doesn't have a network connection when it
boots up. You see the message Verify your internet settings or contact your service
provider.
Before you begin
The phone must not be connected to an Ethernet cable.
Cisco IP Phone 8800 Series Multiplatform Phones User Guide
149
Settings
Connect the Phone to a Wi-Fi Manually
To Next Page
Loading...
Need help?
General
