Cisco 8800 Series User Manual

Step 2 Select Network configuration > Wi-Fi configuration > Wi-Fi profile.
Step 3 In the Wi-Fi profile screen, press Scan to get all available wireless networks.
Step 4 (Optional) In the Connect to Wi-Fi screen, press Scan again to rescan the list.
Step 5 Select a wireless and press Select or the Select button.
Step 6 In the Setup Wi-Fi screen, set the parameters as mentioned in the Profile Parameters table.
Table 9: Profile Parameters
DescriptionParameter
Allows you to select the authentication method that
is used to secure access to the Wi-Fi network.
Depending on the method you choose, a password,
passphrase, or key field appears so that you can
provide the credentials that are required to join this
Wi-Fi network. Options are:
• Auto
• EAP-FAST
• PEAP-GTC
• PEAP-MSCHAPV2
• PSK
• WEP
• None
Default: PSK
Security mode
Allows you to enter a name for the SSIDs. This name
displays on the phone. Multiple profiles can have the
same network name with different security mode.This
name displays on the phone.
Network name
Allows you to enter a user ID for the network profile.
This field is available when you set the security mode
to Auto, EAP-FAST, PEAP-GTC,
PEAP-MSCHAPV2. This is a mandatory field and it
allows maximum length of 32 alphanumeric
characters.
User ID
Allows you to enter password for the network profile
that you create.
This field is available when you set the security mode
to Auto, EAP-FAST, PEAP-GTC,
PEAP-MSCHAPV2. This is a mandatory field and it
allows maximum length of 64 alphanumeric
characters.
Password
Cisco IP Phone 8800 Series Multiplatform Phones User Guide
154
Settings
Scan and Save a Wi-Fi Network

Cisco 8800 Series Specifications

General

Protocols	SIP, SCCP
Audio	Wideband audio
Connectivity	Gigabit Ethernet
Power	Power over Ethernet (PoE)
Bluetooth	Yes
USB	Yes
Codec Support	G.711, G.722, G.729, iLBC
Dimensions	Varies by model
Weight	Varies by model
Wi-Fi	Yes (varies by model)