Chapter 4 Configuring Class Maps and Policy Maps
Class Map and Policy Map Configuration Quick Start
4-20
Cisco 4700 Series Application Control Engine Appliance Administration Guide
OL-11157-01
6. Attach the Layer 3 and Layer 4 traffic policy to a single VLAN interface or
globally to all VLAN interfaces in the same context.
host1/Admin(config)# interface vlan 50
host1/Admin(config-if)# ip address 192.168
.1.100 255.255.0.0
host1/Admin(config-if)# service-policy inp
ut L4_MGMT_POLICY
7. (Optional) Save your configuration changes to Flash memory.
host1/Admin(config)# exit
host1/Admin# copy
running-config startup-config
Table 4-5 Layer 3 and Layer 4 Network Management Policy Map
Configuration Quick Start (continued)
Task and Command Example
To Next Page
Loading...
