Chapter 4 Configuring Class Maps and Policy Maps
Configuring Layer 3 and Layer 4 Class Maps
4-34
Cisco 4700 Series Application Control Engine Appliance Administration Guide
OL-11157-01
Follow these guidelines when you define the VIP address match criteria:
• You can specify multiple match virtual-address commands within a class
map.
• The match virtual-address command cannot be combined with other types
of match commands.
For example, to specify that class map L4_
SLB_VIPCLASS matches traffic
destined to VIP address 192.168.1.10 and TCP port number 80, enter:
host1/Admin(config)# class-map L4_SLB_VIP_CLASS
host1/Admin(config-cmap)# match v
irtual-address 192.168.1.10 tcp port
eq 80
To remove the VIP match statement from the class map, enter:
host1/Admin(config-cmap)# no match virtual-address 192.168.1.10 tcp
port eq 80
rtsp 554 Real Time Stream control Protocol (RTSP)
smtp 25 Simple Mail Transfer Protocol (SMTP)
telnet 23 Telnet
www 80 World Wide Web (WWW)
Ta b l e 4-8 Well-Known UDP Port Numbers and Key Words
Key Word Port Number Description
domain 53 Domain Name System
wsp 9200 Connectionless Wireless Session Protocol
(WSP)
wsp-wtls 9202 Secure Connectionless WSP
wsp-wtp 9201 Connection-based WSP
wsp-wtp-wtls 9203 Secure Connection-based WSP
Table 4-7 Well-Known TCP Port Numbers and Keywords (continued)
Keyword Port Number Description
To Next Page
Loading...
