4-59
Cisco 4700 Series Application Control Engine Appliance Administration Guide
OL-11157-01
Chapter 4 Configuring Class Maps and Policy Maps
Applying a Service Policy
To detach a traffic policy from an interface VLAN, enter:
host1/Admin(config-if)# no service-policy input L4_SLB_POLICY
To globally detach a traffic policy from all VLANs associated with a context,
enter:
host1/Admin(config)# no service-policy input L4_SLB_POLICY
You can detach a traffic policy by one of these methods:
• Individually from the last VLAN interface on which you applied the service
policy
• Globally from all VLAN interfaces in the same context
When you detach a policy, the ACE automatically rese
ts the associated service
policy statistics to provide a new starting point for the service policy statistics the
next time that you attach a traffic policy to a specific VLAN interface or globally
to all VLAN interfaces in the same context.
The following guidelines and restrictions apply when you create a service policy:
• Policy maps, applied globally in a context, are internally applied on all
interfaces associated with the context.
• A policy activated on a VLAN interface overwrites any specified global
policies for overlapping classification and actions.
• The ACE allows only one policy of a specific feature type to be activated on
a VLAN interface.
To Next Page
Loading...
