4-73
Cisco 4700 Series Application Control Engine Appliance Administration Guide
OL-11157-01
Chapter 4 Configuring Class Maps and Policy Maps
Viewing Class Maps, Policy Maps, and Service Policies
Table 4-11 describes the various fields that can appear in the show service-policy
detail comman
d output.
Ta b l e 4-11 Field Descriptions for the show service-policy detail Command
Output
Field Description
Status Status of the policy map as applie
d in a service policy to a
VLAN interface: Active or Inactive.
Description Optional description about the policy map.
Context Global
Pol
icy
Status whether the service policy has been applied globally
in configuration mode to all VLAN interfaces for the
context.
Interface VLAN identifier of the interface associated with the
service
policy.
Service-Policy Identifier of the policy map.
Class Identifier of the class map associated with the policy map.
Inspect DNS DNS application protocol inspection statistics.
Inspect HTTP HTTP application protocol inspection statistics.
Inspect FTP FTP application protocol inspection statistics.
Inspect ICMP ICMP application protocol inspection statistics.
Inspect RTSP RTSP application protocol inspection statistics.
Loadbalance Server load-balancing statis
tics.
Nat NAT statistics.
Max Length Maximum length of a DNS reply.
Strict FTP Status of the strict FTP function for FTP application
pro
tocol inspection: Enabled or Disabled.
URL Logging Status of the URL logging function for HTTP application
pro
tocol inspection: Enabled or Disabled.
ICMP Error Status of the ICMP error fun
ction for ICMP application
protocol inspection: Enabled or Disabled.
Nat Dynamic NAT pool identifier with the c
onfigured interface VLAN.
VIP Route Metric Not applicable for the ACE appliance.
To Next Page
Loading...
