7-11
Cisco 4700 Series Application Control Engine Appliance Administration Guide
OL-11157-01
Chapter 7 Configuring Redundant ACE Appliances
Redundancy Configuration Quick Start
14. (Optional) Save your configuration changes to Flash memory.
host1/Admin(config)# exit
host1/Admin# copy
running-config startup-config
15. (Recommended) Verify your redundancy configuration by using the
following commands in Exec mode:
host1/Admin# show running-config ft
host1/Admin# show
running-config interface
Table 7-1 Redundancy Configuration Quick Start (continued)
Task and Command Example
To Next Page
Loading...
