Chapter 7 Configuring Redundant ACE Appliances
Displaying Redundancy Information
7-42
Cisco 4700 Series Application Control Engine Appliance Administration Guide
OL-11157-01
The keywords and options are:
• brief—Displays the group ID, local state, peer state, context name, and
context ID of all the FT groups that are configured in the ACE.
• group group_id—Displays FT group statistics for the specified FT group. In
the Admin context, this keyword displays statistics for all FT groups in the
ACE. Also, in the Admin context, you can specify an FT group number to
display statistics for an individual group. In a user context, this keyword
displays statistics only for the FT group to which the user context belongs.
• detail—Displays detailed information for all FT groups or the specified FT
group.
• status—Displays the current operating status for all FT groups or the
specified FT group.
• summary—Displays summary information for all FT groups or the specified
FT group.
For example, enter:
host1/Admin# show ft group group1 detail
Table 7-2 describes the fields in the show ft group command output.
Ta b l e 7-2 Field Descriptions for the show ft group Command Output
Field Description
FT Group FT group identifier.
Configured Status Configured state of the FT group. Possible states a
re the
in-service or out-of-service states.
To Next Page
Loading...
