8-9
Cisco 4700 Series Application Control Engine Appliance Administration Guide
OL-11157-01
Chapter 8 Configuring SNMP
SNMP Overview
ENTITY-SENSOR-MIB CISCO-ENTITY-
SENSOR-RFC-
CAPABILITY
Contains a single group called the
entitySensorValueGroup, which allows
objects to convey the current value and status
of a physical sensor. The
entitySensorValueGroup contains a single
table, called the entPhySensorTable, which
provides a few read-only objects that identify
the type of data units, scaling factor,
precision, current value, and operational
status of the sensor.
The ENTITY-SENSOR-MIB is supported
onl
y in the Admin context.
The ENTITY-SENSOR-MIB i
s described in
RFC 3433.
SNMPv3 Agent MIBs
SNMP-COMMUNITY-MIB CISCO-SNMP-
COMMUNITY-
CAPABILITY
Contains objects for mapping between
co
mmunity strings and version-independent
SNMP message parameters. In addition, this
MIB provides a mechanism for performing
source address validation on incoming
requests and for selecting community strings
based on target addresses for outgoing
notifications.
The SNMP-COMMUNITY-MIB is described
in RFC 358
4.
Note SNMP communities are applicable
only for SNMPv1 and SNMPv2c.
SNMPv3 requires user configuration
information such as specifying the
role group that the user belongs to,
authentication parameters for the user,
the authentication password, and
message encryption parameters.
Table 8-1 SNMP MIB Support (continued)
MIB Support Capability MIB Description
To Next Page
Loading...
