8-49
Cisco 4700 Series Application Control Engine Appliance Administration Guide
OL-11157-01
Chapter 8 Configuring SNMP
Example of an SNMP Configuration
service-policy input L4_REMOTE-MGT_POLICY
snmp-server user user1 Network-Monitor auth sha “adcd1234”
snmp-server community ACE-public group ro
snmp-server contact “User1 user1@cisco.com”
snmp-server location “San Jose CA”
snmp-server host 192.168.0.236 traps version 2c ACE-public
snmp-server enable traps slb vserver
snmp-server enable traps slb real
snmp-server enable traps syslog
snmp-server enable traps snmp authentication
snmp-server enable traps snmp linkup
snmp-server enable traps snmp linkdown
To Next Page
Loading...
