REVIEW DRAFT - CISCO CONFIDENTIAL
9-23
Cisco 4700 Series Application Control Engine Appliance Administration Guide
OL-11157-01
Chapter 9 Configuring the XML Interface
Configuring HTTP and HTTPS Management Traffic Services
For example, to display service policy statistics for the
MGMT_XML-HTTPS_POLICY policy map, enter:
host1/Admin# show service-policy MGMT_XML-HTTPS_POLICY
Status : ACTIVE
Description: Allow mgmt protocols
-----------------------------------------
Context Global Policy:
service-policy: MGMT_XML-HTTPS_POLICY
To clear the service policy statistics, use the clear service-policy command. The
syntax of this command is:
clear service-policy pol
icy_name
For the p
olicy_name argument, enter the identifier of an existing policy map that
is currently in service (applied to an interface) as an unquoted text string with a
maximum of 64 alphanumeric characters.
For example, to clear the stati
stics for the policy map
MGMT_XML-HTTPS_POLICY that is currently in service, enter:
host1/Admin# clear service-policy MGMT_XML-HTTPS_POLICY
To Next Page
Loading...
