Chapter 2 Enabling Remote Access to the ACE
Configuring Remote Network Management Traffic Services
2-14
Cisco 4700 Series Application Control Engine Appliance Administration Guide
OL-11157-01
To globally detach the remote access traffic policy from all VLANs associated
with a context, enter:
host1/Admin(config)# no service-policy input REMOTE_MGMT_ALLOW_POLICY
You can detach a traffic policy by either of the following methods:
• Individually from the last VLAN interface on which you applied the service
policy
• Globally from all VLAN interfaces in the same context
The ACE automatically resets the associated service policy statistics to provide a
n
ew starting point for the service policy statistics the next time that you attach a
traffic policy to a specific VLAN interface or globally to all VLAN interfaces in
the same context.
Note the following guidelines and restric
tions when creating a service policy:
• Policy maps, applied globally in a context, are internally applied on all
interfaces existing in the context.
• A policy activated on an interface overwrites any specified global policies for
overlapping classification and actions.
• The ACE allows only one policy of a specific feature type to be activated on
a given interface.
To display service policy statistics for a Lay
er 3 and Layer 4 remote network
traffic management policy map, use the show service-policy command in Exec
mode.
The syntax of this command is:
show service-policy po
licy_name [detail]
The keywords, options, and arguments are as follows:
• policy_name—The identifies an existing policy map that is currently in
service (applied to an interface) as an unquoted text string with a maximum
of 64 alphanumeric characters.
• detail—(Optional) Displays a more detailed listing of policy map statistics
and status information.
To Next Page
Loading...
