Index
IN-7
Catalyst 2950 Desktop Switch Software Configuration Guide
78-11380-03
console port
access
4-2
connecting to 3-9
default settings 4-2
conventions
command
xix
for examples xix
text xix
copy running-config startup-config command 14-4
CoS 1-5
configuring 13-8
configuring priority queues 13-24
defining 13-8
CoS-to-DSCP map for QoS 13-21
cross-stack UplinkFast, STP
configuring
9-33
connecting stack ports 9-15
described 9-12
fast-convergence events 9-14
Fast Uplink Transition Protocol 9-13
limitations 9-15
normal-convergence events 9-14
Stack Membership Discovery Protocol 9-13
D
database, VTP 8-15, 8-17
date, setting 6-11
daylight saving time 6-11
debugging
enabling all system diagnostics
14-12
enabling for a specific feature 14-11
redirecting error message output 14-12
using commands 14-11
default commands 3-4
default configuration
802.1X
7-6
EtherChannel 10-13
MVR 11-10
default configuration (continued)
QoS
13-9
RADIUS 6-26
STP 9-20
VLANs 8-16
VMPS 8-31
VTP 8-11
default settings, changing 4-7
deleting VLAN from database 8-18
destination addresses, in ACLs 12-11
destination-based port groups 6-19
device icons
Front Panel view
2-5
Topology view 2-12
device labels 2-13
Device Manager 2-2
SeealsoSwitchManager
device pop-up menu
Front Panel view
2-21
Topology view 2-23
DHCP 1-3, 6-2
Client Request Process 6-3
configuring DHCP server 6-4
configuring domain name and DNS 6-5
configuring relay device 6-6
configuring TFTP server 6-5
example configuration 6-8
obtaining configuration files 6-7
overview 6-3
Differentiated Services architecture, QoS 13-2
Differentiated Services Code Point 13-3
dir flash command 14-4
disabling
broadcast storm control
10-5
port security 10-8
SNMP 6-12
trunking on a port 8-22
trunk port 8-22
VTP 8-13
To Next Page
Loading...
