EasyManuals Logo

Cisco Catalyst 2950 Software Guide

Cisco Catalyst 2950
376 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #221 background imageLoading...
Page #221 background image
9-15
Catalyst 2950 Desktop Switch Software Configuration Guide
78-11380-03
Chapter 9 Configuring STP
Understanding Advanced STP Features
Limitations
These limitations apply to CSUF:
CSUF uses the GigaStack GBIC and runs on Catalyst 3550 switches, all Catalyst 3500 XL switches,
Catalyst 2950 switches with GBIC module slots, and on modular Catalyst 2900 XL switches.
Up to nine stack switches can be connected through their stack ports to the multidrop backbone.
Only one stack port per switch is supported.
Each stack switch can be connected to the STP backbone through one uplink.
If the stack consists of a mixture of Catalyst 2900 XL, Catalyst 3500 XL, Catalyst 2950 and Catalyst
3550 switches, up to 64 VLANs with STP enabled are supported. If the stack consists of
Catalyst 3550 switches, up to 128 VLANs with STP enabled are supported.
Connecting the Stack Ports
A fast transition occurs across the stack of switches if the multidrop backbone connections are a
continuous link from one GigaStack GBIC to another as shown in Figure 9-9. You should follow these
guidelines:
A switch supports only one stack port.
Do not connect alternate stack-root ports to stack ports.
Connect all stack ports on the switch stack to the multidrop backbone.
You can connect the open ports on the top and bottom GigaStack GBICs within the same stack to
form a redundant link.

Table of Contents

Other manuals for Cisco Catalyst 2950

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco Catalyst 2950 and is the answer not in the manual?

Cisco Catalyst 2950 Specifications

General IconGeneral
Forwarding Bandwidth8.8 Gbps
Switching Capacity13.6 Gbps
Forwarding Rate6.6 Mpps
Weight3.6 kg
RAM16 MB
Flash Memory8 MB
Operating Humidity10% to 85% non-condensing
Uplink Ports2 x 10/100/1000Base-T
Dimensions4.4 cm x 44.5 cm x 24.2 cm
Remote Management ProtocolSNMP, Telnet, HTTP
FeaturesQuality of Service (QoS), VLAN support
Compliant StandardsIEEE 802.3, IEEE 802.3u, IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p
Status Indicatorssystem
Operating Temperature0 to 45°C
Ports24 x 10/100 Ethernet ports
MAC Address Table Size8, 192 entries
Power SupplyInternal 100-240V AC, 50-60Hz

Related product manuals