Cisco IE-5000 User Manual

493
Configuring LLDP, LLDP-MED, and Wired Location Service
How to Configure LLDP, LLDP-MED, and Wired Location Service
Configuring Location TLV and Wired Location Service
This task explains how to configure location information for an endpoint and to apply it to an interface.
Command Purpose
1. configure terminal Enters global configuration mode.
2. location {admin-tag string | civic-location
identifier id | elin-location string identifier
id}
Specifies the location information for an endpoint.
 admin-tag—Specifies an administrative tag or site information.
 civic-location—Specifies civic location information.
 elin-location—Specifies emergency location information (ELIN).
 identifier id—Specifies the ID for the civic location.
 string—Specifies the site or location information in alphanumeric
format.
3. exit Returns to global configuration mode.
4. interface interface-id Specifies the interface on which you are configuring the location
information, and enters interface configuration mode.
5. location {additional-location-information
word | civic-location-id id |
elin-location-id id}
Enters location information for an interface:
additional-location-information—Specifies additional information
for a location or place.
civic-location-id—Specifies global civic location information for an
interface.
elin-location-id—Specifies emergency location information for an
interface.
id—Specifies the ID for the civic location or the ELIN location. The ID
range is 1 to 4095.
word—Specifies a word or phrase with additional location
information.
6. end Returns to privileged EXEC mode.
7. nmsp enable Enables the NMSP features on the switch.
8. nmsp notification interval {attachment |
location} interval-seconds
Specifies the NMSP notification interval.
attachment—Specifies the attachment notification interval.
location—Specifies the location notification interval.
interval-seconds—Duration in seconds before the switch sends the
MSE the location or attachment updates. The range is 1 to 30; the
default is 30.
9. end Returns to privileged EXEC mode.

Cisco IE-5000 Specifications

General

Brand	Cisco
Model	IE-5000
Category	Switch
Language	English