Cisco IE-5000 User Manual

509
Cisco Systems, Inc. www.cisco.com
Configuring RMON
Prerequisites for RMON
 You must configure SNMP on the switch to access RMON MIB objects.
 We recommend that you use a generic RMON console application on the network management station (NMS) to take
advantage of the RMON network management capabilities.
Restrictions for RMON
 64-bit counters are not supported for RMON alarms.
Information About RMON
RMON
RMON is an Internet Engineering Task Force (IETF) standard monitoring specification that allows various network agents
and console systems to exchange network monitoring data. You can use the RMON feature with the Simple Network
Management Protocol (SNMP) agent in the switch to monitor all the traffic flowing among switches on all connected LAN
segments as shown in Figure 72 on page 510.

Cisco IE-5000 Specifications

General

Model	IE-5000
Category	Industrial Ethernet Switch
Switching Capacity	128 Gbps
Forwarding Rate	95.2 Mpps
MAC Address Table Size	16, 000 entries
Ports	16 or 24 10/100/1000 ports
Uplink Ports	4 SFP ports
Operating Temperature	-40°C to 70°C
Power Supply	Dual redundant power supplies
Mounting	DIN rail
Management	Web GUI, CLI, SNMP
Input Voltage	24 VDC or 110/220 VAC
Layer	Layer 2/3
Jumbo Frame Support	Up to 9216 bytes