540
Configuring SNMP
How to Configure SNMP
Setting the CPU Threshold Notification Types and Values
Setting the Agent Contact and Location Information
8. snmp-server queue-length length (Optional) Establishes the message queue length for each trap host. The
range is 1 to 1000; the default is 10.
9. snmp-server trap-timeout seconds (Optional) Defines how often to resend trap messages. The range is 1 to
1000; the default is 30 seconds.
10. end Returns to privileged EXEC mode.
Command Purpose
Command Purpose
1. configure terminal Enters global configuration mode.
2. process cpu threshold type {total |
process | interrupt} rising percentage
interval seconds [falling fall-percentage
interval seconds]
Sets the CPU threshold notification types and values:
total—Sets the notification type to total CPU utilization.
process—Sets the notification type to CPU process utilization.
interrupt—Sets the notification type to CPU interrupt utilization.
rising percentage—Specifies the percentage (1 to 100) of CPU
resources that, when exceeded for the configured interval, sends
a CPU threshold notification.
interval seconds—Specifies the duration of the CPU threshold
violation in seconds (5 to 86400) that, when met, sends a CPU
threshold notification.
falling fall-percentage—Specifies the percentage (1 to 100) of
CPU resources that, when usage falls below this level for the
configured interval, sends a CPU threshold notification.
This value must be equal to or less than the rising percentage
value. If not specified, the falling fall-percentage value is the
same as the rising percentage value.
3. end Returns to privileged EXEC mode.
Command Purpose
1. configure terminal Enters global configuration mode.
2. snmp-server contact text Sets the system contact string.
3. snmp-server location text Sets the system location string.
4. end Returns to privileged EXEC mode.
To Next Page
Loading...
Need help?
General
