Cisco IE-5000 User Manual

543
Configuring SNMP
Additional References
Switch(config)# snmp-server enable traps
Switch(config)# snmp-server inform retries 0
Assigning a String to SNMP: Example
This example shows how to assign the string comaccess to SNMP, to allow read-only access, and to specify that IP
access list 4 can use the community string to gain access to the switch SNMP agent:
Switch(config)# snmp-server community comaccess ro 4
Additional References
The following sections provide references related to switch administration:

Cisco IE-5000 Specifications

General

Brand	Cisco
Model	IE-5000
Category	Switch
Language	English