Cisco SPA 501G Administration Guide

Configuring SIP, SPCP, and NAT
Configuring SIP
Cisco SPA 500 Series and WIP310 IP Phone Administration Guide 95
4
Referror Bye Delay Controls when the Cisco IP phone sends BYE to terminate stale
call legs upon completion of call transfers. Multiple delay
settings (Referror, Refer Target, Referee, and Refer-To Target)
are configured on this screen. For the Referror Bye Delay, enter
the appropriate period of time in seconds.
Defaults to 4.
Refer-To Target
Contact
To contact the refer-to target, select yes. Otherwise, select no.
Default: no.
Referee Bye Delay For the Referee Bye Delay, enter the appropriate period of time
in seconds.
Defaults to 0.
Parameter Description

Cisco SPA 501G Specifications

General

Brand	Cisco
Model	SPA 501G
Category	IP Phone
Language	English