Cisco SPA 501G Administration Guide

Getting Started
Upgrading Firmware
Cisco SPA 500 Series and WIP310 IP Phone Administration Guide 8
1
Cisco SPA 502G, Cisco SPA 504G, Cisco SPA 508G, Cisco SPA 509G:
STEP 1 Press the Setup button.
STEP 2 Scroll to Product Info and then press Select. The current firmware is displayed
under
Software Version .
Cisco SPA 525G:
STEP 1 Press the Setup button.
STEP 2 Scroll to Status and press Select.
STEP 3 Select Product Information. The current firmware is displayed under Software
Version
.
WIP310
STEP 1 In the Home screen, press the Options, highlight Phone Info , and press the Select
button.
STEP 2 Scroll to Software Version .
Determining Your IP Address
Before you upgrade, you’ll need the IP address of the phone you are upgrading. To
get your IP address:
Cisco SPA 501G:
STEP 1 Press the Setup button.
STEP 2 In the IVR menu, enter 110, then press #. The IP address is recited.

Cisco SPA 501G Specifications

General

Brand	Cisco
Model	SPA 501G
Category	IP Phone
Language	English