Cisco SPA 501G Administration Guide

Cisco SPA 500 Series and Wireless IP Phone Field Reference
Phone Tab
Cisco SPA 500 Series and WIP310 IP Phone Administration Guide 248
B
Line Key LED Pattern
NOTE Does not apply to the WIP310.
SCA Barge-In Enable Enables the SCA Barge-In.
Defaults to no.
Parameter Description
Parameter Description
Idle LED LED pattern during the Idle state, where the call
appearance is not is in use and is available to make a
new call. Leaving this entry blank indicates the default
value of c=g.
Remote Undefined LED LED pattern during the Remote Undefined state, where
the shared call state is undefined (the station is still
waiting for the state information from the application
server). Not applicable if the call appearance is not
shared. Leaving this entry blank indicates the default
value of c=r;p=d.
Local Seized LED LED pattern during the Local Seized state, where this
station has seized the call appearance to prepare for a
new outbound call. Leaving this entry blank indicates
the default value of c=r.
Remote Seized LED LED pattern during the Remote Seized state, where the
shared call appearance is seized by another station.
Not application if the call appearance is not shared.
Leaving this entry blank indicates the default value of
c=r;p=d.
Local Progressing LED LED pattern during the Local Progressing state, where
this station is attempting on this call appearance an
outgoing call that is in proceeding (i.e. the called
number is ringing). Leaving this entry blank indicates
the default value of c=r.

Cisco SPA 501G Specifications

General

Brand	Cisco
Model	SPA 501G
Category	IP Phone
Language	English