Cisco SPA 501G Administration Guide

Customizing Cisco SPA and Wireless IP Phones
Configuring Phone Information and Display Settings
Cisco SPA 500 Series and WIP310 IP Phone Administration Guide 34
3
Configuring the Phone Name
STEP 1 Log in to the web administration interface.
STEP 2 Click Admin Login and advanced.
STEP 3 Click the Phone tab.
STEP 4 Under General, enter the Station Name, or name for the phone. This name shows
up in the corporate directory.
STEP 5 Click Submit All Changes. The phone reboots.
Configuring Voice Mail
To configure the phone to connect to voice mail:
STEP 1 Log in to the web administration interface.
STEP 2 Click Admin Login and advanced.
STEP 3 Click the Phone tab.
STEP 4 Under General, enter the Voice Mail Number. This is the internal or external phone
number or URL to access the voice mail system. If using an external voice-mail
service, the number must include any digits required to dial out and any required
area code.
STEP 5 Click Submit All Changes. The phone reboots.
Configuring Internal Voice Mail for Each Extension (When Using Cisco
SPA 400 for Voice Mail)
STEP 1 Log in to the web administration interface.
STEP 2 Click Admin Login and advanced.
STEP 3 Click the Ext <number> tab.
STEP 4 Under Call Feature Settings, enter the voice mail line number and phone extension
in the Mailbox ID field. For example, 2101 indicates that the Cisco SPA 400 voice
mail server is configured on the Cisco SPA 9000 Line 2, phone extension 101.

Cisco SPA 501G Specifications

General

Brand	Cisco
Model	SPA 501G
Category	IP Phone
Language	English