Cisco SPA 501G Administration Guide

Configuring the Cisco SPA 500S Attendant Console
Setting Up the Cisco SPA 500S Attendant Console
Cisco SPA 500 Series and WIP310 IP Phone Administration Guide 187
9
BroadSoft syntax
For example, the following enables speed dialing and BLF monitoring, with a BLF
monitoring list URI of marketing, for the user account reception, on a BroadSoft
server with the IP address 192.168.100.1:
fnc=sd+blf;sub=marketing@192.168.100.1;usr=reception@192.168.100.1
The nme keyword is not used because the BroadSoft server uses the user
account name assigned to the BLF monitoring list.
Note that you can configure a list of BLF subscriptions automatically using a URI
(rather than individually configuring each BLF entry). See the “Configuring
BroadSoft Busy Lamp Field Auto-Configuration” section on page 187.
Asterisk syntax
The following is an example entry for a Asterisk server. This entry enables speed
dialing, BLF monitoring, and call pickup on a Asterisk server with the IP address
192.168.1.11:
fnc=sd+blf+cp;sub=35890@192.168.1.11;nme=35890
Configuring BroadSoft Busy Lamp Field Auto-Configuration
Rather than configuring each BLF key individually, you can enter a single
SUBSCRIBE URI and automatically generate configuration scripts for BLF keys for
all users on the monitored list.
To configure BLF auto-configuration:
STEP 1 Log in to the web administration interface.
STEP 2 Click Admin Login.
STEP 3 Click advanced.
STEP 4 Click the Att Console tab.

Cisco SPA 501G Specifications

General

Brand	Cisco
Model	SPA 501G
Category	IP Phone
Language	English