Cisco SPA 501G Administration Guide

Cisco SPA 500 Series and Wireless IP Phone Field Reference
System Tab
Cisco SPA 500 Series and WIP310 IP Phone Administration Guide 204
B
Internet Connection Type and Static IP Settings
SPA525-protocol (Cisco SPA
525G only)
Allows you to choose the type of protocol for the
phone:
• SIP—Session Initiation Protocol. Choose if the
phone is used with a SIP call control system, such
as the Cisco SPA 9000 or a SIP call control system
from another provider such as BroadSoft or
Asterisk.
• SPCP—Smart Phone Control Protocol. Choose if
the phone is used with a Cisco Unified
Communications Series server, such as the Cisco
Unified Communications 500 Series for Small
Business.
SPA525-auto-detect-sccp
(Cisco SPA 525G only)
Choose if the phone should automatically detect the
type of protocol used on the network to which it is
connected. If set to yes, the phone automatically
discovers if it is connected to a call control system
using SPCP.
SPA525-readonly If set to yes, the Signaling Protocol and Auto Detect
SCCP Settings on the phone are read only. If set to no,
the above settings on the phone can be changed by
the end user.
Parameter Description
Parameter Description
Internet Connection Type Choose the type of internet connection:
• DHCP
• Static IP
• PPPoE (not applicable to WIP310)
Static IP If static IP was chosen as the type of internet
connection, displays the static IP address assigned to
the phone.
Netmask If static IP was chosen as the type
Gateway Default router IP address. Blank if DHCP assigned.

Cisco SPA 501G Specifications

General

Brand	Cisco
Model	SPA 501G
Category	IP Phone
Language	English