Cisco SPA 501G Administration Guide

Configuring SIP, SPCP, and NAT
Configuring SIP
Cisco SPA 500 Series and WIP310 IP Phone Administration Guide 100
4
STEP 5 Click Submit All Changes.
Configuring Subscriber Information Parameters
To configure subscriber information parameters for each extension:
STEP 1 Log in to the web administration interface.
STEP 2 Click Admin Login and advanced.
STEP 3 Click the Ext <number> tab.
STEP 4 Enter the subscriber information:
Proxy Redundancy Method Select Normal or Based on SRV port. The phone creates
an internal list of proxies returned in the DNS SRV
records.
If you select Normal, the list contains proxies ranked by
weight and priority.
If you select Based on SRV, the phone uses normal, then
inspects the port number based on the first-listed proxy
port.
Defaults to Normal.
Parameter Description
Parameter Description
Display Name Display name for caller ID.
User ID Extension number for this line.
Password Password for this line.
Defaults to blank.
Use Auth ID To use the authentication ID and password for SIP
authentication, select yes. Otherwise, select no to use the user
ID and password.
Defaults to no.

Cisco SPA 501G Specifications

General

Brand	Cisco
Model	SPA 501G
Category	IP Phone
Language	English