Cisco SPA 501G Administration Guide

Cisco SPA 500 Series and Wireless IP Phone Field Reference
Cisco SPA 525G-Specific Tabs
Cisco SPA 500 Series and WIP310 IP Phone Administration Guide 283
B
Cisco SPA 525G-Specific Tabs
The following tabs appear on the Cisco SPA 525G.
Wi-Fi
Enable or disable the Wireless-G device from this tab.
Subscribe Expires Displays when the current subscription expires. After
the subscription expires, the Cisco SPA 500S
automatically requests a new subscription.
HW Version Displays the version of the hardware.
Unit Online Displays whether the unit is powered on and
connected or not.
Subscribe Retry Interval Displays the length of time the Cisco SPA 500S waits
to try again if subscription fails.
SW Version Displays the version of the software currently running
on the unit.
Key Name Displays the name assigned to each key (1-32) on the
Cisco SPA 500S unit.
Type Displays the function enabled for each key (1-32) on the
Cisco SPA 500S unit.
Line Displays the extension assigned to each key (1-32) on
the Cisco SPA 500S unit.
Station Displays the subscribe URI configured for each key (1-
32) on the Cisco SPA 500S unit.
Parameter Description
Parameter Description
Wireless Enable Click On to enable the wireless controller.

Cisco SPA 501G Specifications

General

Brand	Cisco
Model	SPA 501G
Category	IP Phone
Language	English