Cisco SPA 501G Administration Guide

Cisco SPA 500 Series and Wireless IP Phone Field Reference
User Tab
Cisco SPA 500 Series and WIP310 IP Phone Administration Guide 279
B
Screen (Cisco SPA 525G)
Parameter Description
Ringer Volume Sets the default volume for the ringer.
Speaker Volume Sets the default volume for the full-duplex speakerphone.
Handset Volume Sets the default volume for the handset.
Headset Volume Sets the default volume for the headset.
Bluetooth Volume Volume of the Bluetooth device.
NOTE Applies to the Cisco SPA 525G only.
Parameter Description
Screen Saver Enable Enables a screen saver on the phone’s LCD. When the phone
is idle for a specified time, it enters screen saver mode.
(Users can set up screen savers directly using phone Setup
button.) Any button press or on/off hook event triggers the
phone to return to its normal mode. (The screen shows
“Press any key to unlock your phone.”) If a user password is
set, the user must enter it to exit screen saver mode.
Screen Saver Type
Choose the type of screen saver:
•
Black Background—Displays a black screen.
• Gray Background—Displays a gray screen.
• Black/Gray Rotation—The screen incrementally cycles
from black to gray.
• Picture Rotation—The screen rotates through available
pictures on the phone.
• Digital Frame—Shows the background picture.
Screen Saver Trigger
Time
Number of seconds that the phone remains idle before
the screen saver turns on.
Screen Saver Refresh
Time
Number of seconds before the screen saver should refresh
(if, for example, you chose a rotation of pictures).

Cisco SPA 501G Specifications

General

Brand	Cisco
Model	SPA 501G
Category	IP Phone
Language	English