Cisco SPA 501G Administration Guide

Configuring Regional Parameters and Supplementary Services
Call Progress Tones
Cisco SPA 500 Series and WIP310 IP Phone Administration Guide 149
7
Call Progress Tones
For definitions of all call progress tones, see “Call Progress Tones” section on
page 224.
Distinctive Ring Patterns
Ring cadence defines the ringing pattern that announces a telephone call.
NOTE The WIP310 has only eight distinctive ring pattern fields.
The pattern is:
length(on/off)
where:
• Length: The total length of the ring
• On: The number of “on” seconds
• Off: The number of “off” seconds.
Example 1: Normal Ring
60(2/4)
• Number of Cadence Sections = 1
• Cadence Section 1: Section Length = 60 s
• Number of Segments = 1
• Segment 1: On=2s, Off=4s
• Total Ring Length = 60s
Example 2: Distinctive Ring (short,short,short,long)
60(.2/.2,.2/.2,.2/.2,1/4)
• Number of Cadence Sections = 1
• Cadence Section 1: Section Length = 60s

Cisco SPA 501G Specifications

General

Brand	Cisco
Model	SPA 501G
Category	IP Phone
Language	English