Cisco SPA 500 Series and Wireless IP Phone Field Reference
Phone Tab
Cisco SPA 500 Series and WIP310 IP Phone Administration Guide 246
B
Line Key
When used in the configuration profile, parameters in this section must be
appended with
n
, where
n
represents line 1, 2, 3, 4, 5 or 6. For more information on
these parameters, see the “Configuring Lines and Extensions” section on
page 20.
NOTE Does not apply to the WIP310.
Parameter Description
Extension Extension number of the line key.
Short Name A short label shown on the LCD display for line key 1
through line key 6.
Share Call Appearance Yes indicates that Line Key 1/2/3/4/5/6 is a shared call
appearance. Otherwise this call appearance is not
shared (it is private).
Defaults to no.
Extended Function Use to assign Busy Lamp Field, Call Pickup, and Speed
Dial Functions to Idle Lines on the IP phone.
Syntax is:
fnc=type;sub=stationname@$PROXY;ext=
extension#@$PROXY
where:
• fnc: function
• blf: busy lamp field
• cp: call pickup
• sub: station name (not needed for speed dial)
• ext or usr: extension or user (the usr and ext
keywords are interchangeable)
To Next Page
Loading...
Need help?
General
