Cisco SPA 501G Administration Guide

Configuring Regional Parameters and Supplementary Services
Vertical Service Announcement Codes (SPA 500 Series)
Cisco SPA 500 Series and WIP310 IP Phone Administration Guide 157
7
When the user enables call waiting service, the IP phone automatically calls
"1234
00 @$proxy".
When the user
disables the call waiting service, IP phone connects to
"1234
01 @$proxy".
If the <Service Annc Extension Codes> do not define CWT/CWF extension codes,
the IP phone defaults to normal.
Bonus Services Announcement description
When the user enables the callback service using the *code, the IP phone
automatically calls “123400@$proxy.”
When the user disables the callback service using the *code, the IP phone
automatically connects to the “123401@$proxy.”
If the
Service Annc Extension Codes do not define CBT/CBF extension codes, the
IP phone does not use this feature.
[Line1/2]<Service Announcement Serv> = Yes
[Regional]<Service Annc Base Number> = {announcement server base number}
[Regional]<Service Annc Extension Codes> = {SAEC Script}
SAEC Script format:{SA_map;}* Here * means 0 or multiple
SA_map syntax:
SA_serv=SA_extcode
SA_serv is the name of service plus the current condition;
SA_extcode is the extension code which the ANNC server will route to.
Appendix: SA_serv list
1) Call Back
CBT: Call back enabled
CBF: Call back disabled
CBB: Call back busy enabled
2) Call Forward
FAT: Call forward all enabled
FAF: Call forward all disabled
FBT: Call forward busy enabled
FBF: Call forward busy disabled
FNT: Call forward no answer enabled
FNF: Call forward no answer disabled
FLT: Call forward last enabled
FLF: Call forward last disabled
3) Call Waiting
CWT: Call waiting enabled
CWF: Call waiting disabled
4) Block Last Call
BLT: Block last call enabled
BLF: Block last call disabled
5) Accept Last Call
ALT: Accept last call enabled
ALF: Accept last call disabled

Cisco SPA 501G Specifications

General

Brand	Cisco
Model	SPA 501G
Category	IP Phone
Language	English