Cisco SPA 501G

Cisco SPA 500 Series and Wireless IP Phone Field Reference
Info Tab
Cisco SPA 500 Series and WIP310 IP Phone Administration Guide 195
B
Info Tab
This section describes the fields for the following headings on the Info tab:
• System Information, page 195
• Network Configuration (SPCP), page 197
• VPN Status, page 197
• Product Information, page 198
• Phone Status, page 198
• Line/Call Status, page 200
NOTE The fields on this tab are read-only and cannot be edited.
System Information
Parameter Description
DHCP Indicates if DHCP is enabled.
NOTE Not applicable to Cisco SPA 525G or WIP310.
Connection Type (WIP310/
Cisco SPA 525G only)
Indicates the type of internet connection for the phone:
• DHCP
• Static IP
• PPPoE (not applicable to WIP310)
Current IP Displays the current IP address assigned to the IP
phone.
Host Name Displays the current host name assigned to the IP
phone (defaults to SipuraSPA).
Domain Displays the network domain name of the IP phone.
Current Netmask Displays the network mask assigned to the IP phone.