Cisco SPA 501G Administration Guide

Cisco SPA 500 Series and Wireless IP Phone Field Reference
Attendant Console Status
Cisco SPA 500 Series and WIP310 IP Phone Administration Guide 282
B
For more information, see Chapter 9, “Configuring the Cisco SPA 500S
Attendant Console.”.
Unit 2
See the description for Unit 1 above. Enter a strings that define the extension and
other parameters associated with each lighted button on the second Cisco SPA
500S unit. Keywords and values are case-sensitive. The configuration script is
described in the “Setting Up the Cisco SPA 500S Attendant Console” section
on page 180.
Attendant Console Status
This page provides two tabs to display the status of up to two Cisco SPA 500S
units that are supported by a single IP phone:
• Unit 1—Displays information about the first Cisco SPA 500S unit.
• Unit 2—Displays information about the second Cisco SPA 500S unit.
Each tab provides the read-only fields described in the following table:
BLF List URI Automatically configures BLF subscriptions for all
users on a monitored list. See Configuring BroadSoft
Busy Lamp Field Auto-Configuration, page 187.
Unit 1 Key 1-32 Enter a strings that define the extension and other
parameters associated with each lighted button on the
first Cisco SPA 500S unit. Keywords and values are
case-sensitive. The configuration script is described in
the “Unit/Key Configuration Scripts” section on
page 184
.
Parameter Description
Parameter Description
Unit Enable Displays if the Unit is enabled or disabled.

Cisco SPA 501G Specifications

General

Brand	Cisco
Model	SPA 501G
Category	IP Phone
Language	English