Cisco SPA 501G Administration Guide

Cisco SPA 500 Series and Wireless IP Phone Field Reference
Phone Tab
Cisco SPA 500 Series and WIP310 IP Phone Administration Guide 259
B
Programmable Softkeys
LDAP Display Attrs Format of LDAP results display on phone where:
• a—Attribute name
• cn—Common name
• sn—Surname (last name)
• telephoneNumber—phone number
• n—Display name
• t—type
• p—phone number
LDAP Number Mapping
Can be blank if not needed.
NOTE With the LDAP number mapping you can
manipulate the number that was retrieved from the
LDAP server. For example, you can append 9 to the
number if your dial plan requires a user to enter 9
before dialing. If you do not manipulate the number in
this fashion, a user can use the Edit Dial feature to
edit the number before dialing out.
Parameter Description
Parameter Description
Programmable Softkey Enable The Cisco SPA 500 Series IP phones have four
softkeys on the screen that, when pressed, perform
certain actions. (The SPA501 does not have any
softkeys.)
You can customize the softkeys displayed on the
phone, and create your own softkeys for speed
dials or XML scripts. Choose yes to enable
programmable softkeys. The softkey information is
entered in the PSK1 through PSK6 fields.
Idle Key List Softkeys that display when the phone is idle. See
Customizing Phone Softkeys, page 51 for more
information.

Cisco SPA 501G Specifications

General

Brand	Cisco
Model	SPA 501G
Category	IP Phone
Language	English